PetLifeEliteR Anions- PolymerTM
Barcode :
Weight : Volume : Treat up to : Packaging :
009989070240 3.5 oz / 100g
4.3 oz / 125ml
125 gallons / 500 liters PET Can
009989070257 7 oz / 200g
8.5 oz / 250ml
250 gallons / 1,000 liters PET Can
009989070264 14 oz / 400g
17 oz / 500ml
500 gallons / 2,000 liters PET Can
009989070271 28 oz / 800g
34 oz / 1,000ml
1,000 gallons / 4,000 liters PVC Zip Bag
Benefit :
PetLifeEliteR Anions- PolymerTM is a unique synthetic polymer that removes soluble and insoluble organic impurities from water. It is the highest capacity organic filtration polymer on the market.
PetLifeEliteR Anions- PolymerTM controls ammonia, nitrites and nitrates by removing ions- from nitrogenous organic waste that would otherwise be converted into these harmful chemicals.
PetLifeEliteR Anions- PolymerTM will not reduce the levels of ions+ such as calcium , magnesium or trace elements.
PetLifeEliteR Anions- PolymerTM progressively darkens as it removes impurities, and is easily renewed by treating with concentrated salt per recommended regeneration instructions.
PetLifeEliteR Anions- PolymerTM does not affect the hardness of water. For freshwater plant, we recommend using with PetLifeEliteR Cations+ PolymerTM to make soft water.
Freshwater & Saltwater suitable.
Directions :
Rinse before use.
Canister filtration : Put them in PetLifeEliteR MediaBagTM (inside) and place it in last chamber.
Passive filtration : Put them in PetLifeEliteR MediaBagTM (inside) and place in an area of pump.
Fluidised reactor filtration : Load them into fluidised reactor as directed, adjust maximum flow rate by the them floating at 3/4 of chamber.
Exhaustion is indicated by a pronounced discoloration of the beads to dark brown.
The first used can treat up to 6 months. After regeneration it will be decrease performance 10-20% we recommended add new more 10-20%
Restart after regeneration 5-6 times.
To Calculate :
Width (inc) x Length (inc) x Height (inc) x 0.015625 = Volume (liters)
For example
20" x 48" x 20" x 0.015265 = 300 liters
Width (cm) x Length (cm) x Height (cm) / 1000 = Volume (liters)
For example
50 cm x 120 cm x 50 cm / 1000 = 300 liters
Basic Regeneration :
Once it is exhausted, it can be easily regenerated with a kitchen salt and water (do not use seawater). Soak in a 1:1 salt:water solution for 24 hours in a non-metallic container.
Expert Regeneration :
Add a solution of PetLifeEliteR ChlorinePTM 5 spoons and water 1 liter.
Soak in a solution for 24 hours in a non-metallic container in a well-ventilated area, away from children.
Rinse well, then soak for 24 hours with a solution containing 20 drops of PetLifeEliteR Clear+ifierTM. Rinse well again.
For freshwater use, soak beads for 4 hours in a solution containing 4 capfuls of PetLifeEliteR pHUpTM per cup of water. The original color and full activity should now be restored and PetLifeEliteR Anions- PolymerTM is ready for reuse.
Caution : some slime coat products may permanently foul PetLifeEliteR Anions- PolymerTM and render regeneration difficult. Do not reuse if odor of chlorine is detectable. If uncertain, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.
Ingredients :
Anion Polymer Food Grade 100%
Specification :
Diameter : 1-2mm
Ion- Adsorption : 80%
Moisture Content : 80%
Ash Content : 5%
PH : 7
Hardness : 50%
C.T.C. : 80%
Contact Time : 3-5 sec
Remark :
Keep out of reach of children.
Safe for human consumption.
For aquarium use only.
Recommend product boosting effective :

 

 

PetLifeEliteR ChlorinePTM

 

 

PetLifeEliteR Clear+ifierTM

 

 

PetLifeEliteR GAC GranularActivatedCarbonTM

 

 

PetLifeEliteR GAZ GranularActivatedZeoliteTM

 

 

PetLifeEliteR GFO GranularFerricOxideTM

 

 

PetLifeEliteR MediaBagTM

 

 

PetLifeEliteR NitroPelletsTM

 

 

PetLifeEliteR pHUpTM

 
Copyright © 2006-2017 PetLifeInc.com All right reserved.